Drilling rig MBU-320-01
UGB on chasiss KAMAZ
Compact self-propelled drilling rig BBU 001
MBU-224-00
URB-40 ROTARY DRILLING RIG
UGB on chasiss URAL
BMG "Scarabey" – portable decision for drilling of seismoprospecting wells.
UGB on chasiss GAZ-33081 "Sadko"
Drilling rig LBU-50-30
UGB on GTM-6.0
UGB on MTLBU
UGB on chasiss GAZ-34039
Compact drill rig BBU 000
УГБ-543-203
PBU-2 on chassis KAMAZ
GTM-6.0
Буровая установка УГБ-543-203
PBU-2 on chassis URAL
PBU-2 on chassis ZIL
PBU-2 on chassis MAZ
URB-40K
URB-40
PBU-2 on chassis MTLBu
MBU-601-000 on the vehicle trailer MZSA
Отзыв по ПБУ-2-319
Мобильная буровая установка МБУ-320
PBU-2 on chassis Renault
назад

LSG-40 is used for descent and ascent on the cable of equipment and tools used for development and repairs of wells of different function. Application field of the LSG-40 is development of wells by the swabbing method and is equipped with its own mast, an automatic rope piler and an electronic depth and raise rate counter. The winch drive is hydraulic.
Mounting: KAMAZ-43118, URALS-4320-0911.
Setting depth, m: 4000


Stock number LSG – 40
Mounting version On the chassis of KAMAZ-43118, URALS-4320-0911
Drive power, kW 70
Service depth, m 4000
Towing capacity, kH (kgs) 40 (4 082)
Hoisting speed, m/s 0-5
Winch gearbox Five-speed
Winch One-barrel, for work with a wire and a rope;
Two-barrel, for work with a wire and a rope
Direction of an exit of a cable (wire) Up via the crown block of a mast or the direct elevator
Barrel rope capacity 10,5 mm, not less than 3200 m; 12,0 mm, not less than 3000 m
Barrel cabel capacity To 8000 м
Cable piler Automatic with manual correction
Drive From the car engine, power take-off,
hydraulic pump, hydromotor
Mechanism of well depth measurement:
- mast Articulated square truss to 12 m;
Interpenetration to 20 m
- Height from ground level 
to an axis of a crown block, m
From 12,5 to 22,0 m
- Loading capacity, t (kN)
From 8 (78,4) to 20 (196,1) t
Box van
Isothermal, frame type
Heating Webasto, ОВ-65 or analogs
Lighting of the hole top FG-18 headlight of TU 37.003.517-81
Auxiliary winch for installation of the wellhead equipment Hydrodriving, with a loading capacity from 1 to 12 t
Additional heater Webasto
Conditioner
Sliding mast up to 20 m
Equipment for sealing of the hole top
The external power supply 220 V
Hydraulic cooler for high climatic temperatures
Suspended boxes and lodgments on box van perimeter
Possibility of delivery of the internal equipment on the coordinated technical requirement

Sales department


Callback service is available from 9 AM to 6 PM

* Fields required

Customer Service

+7 495 902-55-20 (add.2)

On our website we use cookies to collect technical information.
In particular, for the personalized work of the site, we process the IP address of the region of your location.
According to the Federal Law №152 On the protection of personal data.
Policy Personal Data
Ok