→ MBL 23

MBL 23 ((Lutz Kurth, Germany))

Слайдшоу

Drilling mount MBL 23 is installed on the hydraulic excavator with total mass of 10 tons.
It is applied for drilling of wells for anchors, constructions of piles, strengthening’s of bases, drillings of engineering-geological, exploration and seismic prospecting wells and also water supply wells.

Connection with the excavator:
- turn by hydraulics between the top and lower part on +/- 180 deg.
- turn with brakes in the parties by hydraulic cylinders on an angle from 0 to 100 deg.
Remote control with the following functions:
- rotator "right/left"
- hammer "on/off"
- feed of the main mount "lift/lower"
- auxiliary mount "runout/in initial"
- clip "open/close"
- clip "lift/lower"
- cylinder of the excavator adapter "runout / in initial"
- turn of the excavator adapter "runout / in initial"
Racks for transport and storage.

Nomenclature	MBL 23
Drilling depth, m:
- augers, diameter to 145 mm	20
- augers, diameter 108 mm	30
- augers with simultaneous upsetting, D=178 mm (casing pipe)	10
- with washing/ air flushing, D=150 mm	40
- anchor piles Titan 30/11	30
- anchor piles Titan 40/16	20
- anchor piles Titan 52/26	10
Transport base	Excavator weighing 10 tons; the truck with the crane manipulator and a hydraulic system (hydraulic power: 40 l/min, 200 bars)
Boring mount:
- material	welded design made of section material
- feed mechanism	hydraulic cylinder with a chain polyspast
- feed force up/down, kN	20/15
- feed stroke, mm	2300
Auxiliary mount:
- auxiliary mount stroke, mm	500
Rotator:
- type	2-speed, VHM-1
- torque, max., Nm	2500
- rotation frequency, max., rpm	250
Hydraulic hammer:
- shock mechanism	55 l/min, 150 bars, 3000 beats/min
- rotary mechanism	57 l/min, 125 bars
- rotational speed, rpm	130
Hoisting coupling band:
- drift diameter, mm	219
- feed force up, kN	40
- stroke, mm	200
Hydrodrive pipeholder for drill pipes (two compression cylinders on sides):
- forward pressure, kN	80
- pressure range, mm	30-140

	Drilling augers
	Auger drilling bits

Finance lease

JSC «Sberbank Leasing»	+7 (495) 780-73-00	www.sberleasing.ru
Ltd «DENMAR LEASING»	+7 (3466) 49-11-16, +7 (3466) 49-11-15	www.dl-nv.com
Ltd «STONE-XXI»	+7 (495) 981-19-90	www.stone-xxi.ru
JSC «VEB- leasing»	+7 (495) 981-42-40	www.veb-leasing.ru
Ltd «Carcade»	+7 (800) 700-30-30	www.carcade.com
Ltd «URALSIB leasing company»	+7 (495) 785-12-12	www.leasing.uralsib.ru
Ltd «Expert-Leasing» Chelyabinsk	+7 (351) 245-00-00	www.expert-leasing.ru

";s:4:"TYPE";s:4:"html";}

Nomenclature	MBL 23
Drilling depth, m:
- augers, diameter to 145 mm	20
- augers, diameter 108 mm	30
- augers with simultaneous upsetting, D=178 mm (casing pipe)	10
- with washing/ air flushing, D=150 mm	40
- anchor piles Titan 30/11	30
- anchor piles Titan 40/16	20
- anchor piles Titan 52/26	10
Transport base	Excavator weighing 10 tons; the truck with the crane manipulator and a hydraulic system (hydraulic power: 40 l/min, 200 bars)
Boring mount:
- material	welded design made of section material
- feed mechanism	hydraulic cylinder with a chain polyspast
- feed force up/down, kN	20/15
- feed stroke, mm	2300
Auxiliary mount:
- auxiliary mount stroke, mm	500
Rotator:
- type	2-speed, VHM-1
- torque, max., Nm	2500
- rotation frequency, max., rpm	250
Hydraulic hammer:
- shock mechanism	55 l/min, 150 bars, 3000 beats/min
- rotary mechanism	57 l/min, 125 bars
- rotational speed, rpm	130
Hoisting coupling band:
- drift diameter, mm	219
- feed force up, kN	40
- stroke, mm	200
Hydrodrive pipeholder for drill pipes (two compression cylinders on sides):
- forward pressure, kN	80
- pressure range, mm	30-140

Sales department

+7 495 902-60-94

Request for a callback

Callback service is available from 9 AM to 6 PM

Нажимая на кнопку Call me back, я даю согласие на обработку персональных данных в соответствии с законом №152-ФЗ «О персональных данных» от 27.07.2006

Каталог

MBL 23 ((Lutz Kurth, Germany))