Intended purpose:
- engineering surveys including field soil testing
- geological exploration
- technical wells used in construction

UGB drilling rigs operate in engineering-geological research including CPT and SPT, hydrogeological works, drilling of prospecting in grounds to the XII category on drilling capacities. It can be mounted on the clients chassis with relevant cargo dimensions and load capacity thanks to its own deck engine.

The URB-25 drilling rig is intended for drilling by a rotor method of vertical geological, exploratory, hydro geological, operational wells, technological (water step-down, ventilating) wells, including-degassing, ventilation, water-lowering wells and wells for laying communications in underground mining, wells for hydro production and underground leaching.

Rotor-hydraulic drilling rig (URB-40) is intended for prospecting drilling, operational, technological (water lowering, ventilating) wells, wells on water, drilling of conductors of oil and gas wells.

Designed for:
- Hydrogeological, industrial water well drilling
- Drilling for water depression wells, ventilation bore-holes, bumping wells, energy wells, freezing wells.

Exploration drilling rig URB-5AG with a hydraulic mobile rotator is intended for hydrogeology and drilling of wells on water.

Multipurpose MBU-20 AG drilling rig is mounted on various models of vehicles: URALS, KAMAZ. The rig can be mounted on the clients chassis with corresponding power intake value (kW), shaft rotation frequency (RPM), rotation direction. Machine has the hydraulic drive of a mobile rotator, feed cylinders and a cargo winch.

- auger full diameter drilling with a diameter up to 135 mm
- auger drilling by hollow augers with a diameter up to 170 mm
- shock and rotary drilling with a diameter up to 250 mm with application of downhole hammers

USH-2T4 is used on areas with stable soil (not water-logged ground or marshlands with frost penetration on meter and more)

AZA-3 drilling rig is mounted on the chassis of the increased passability like Urals-4320, KAMAZ-43114. The rig can be mounted on the clients chassis with corresponding power intake value (kW), shaft rotation frequency (RPM), rotation direction. Drilling rig differs by the increased value of force moment on a rotator spindle that gives the chance to apply installation during drilling technical wells in construction.

BMG "Scarabey", Is designed to mechanize drilling-and-blasting works in conditions where application of all other machines is impossible due to lack of glades, boning boards, access roads.

Drilling rigs of the LBU-50 family are intended for drilling of wells of different function when performing construction, technical, hydrogeological works and water supply wells, at engineering researches including CPT, SPT and geological surveying.

Crane drilling machine BKM-350 (360) is intended for trip drilling of wells and also installation of supports in them at construction and repair of telephone and telegraphic lines and power lines.

PBU-2 drilling rigs with the mechanical drive of a mobile rotator are intended for engineering-geological research and realizes all technologies of drilling with soil sampling including CPT and SPT.
It can be mounted on the clients chassis with relevant cargo dimensions and load capacity thanks to its own deck engine.

Compact drilling rigs BBU 000 Openok with hydraulic drive of a mobile rotator are used for drilling of wells at engineering-geological research with sampling including SPT.

Mobile drilling rig MBU is intended for drilling of hydrogeology, engineering-geological wells providing SPT and private water supply wells. It can be mounted on the clients chassis with relevant cargo dimensions and load capacity, thanks to its own deck engine.

UBV-318, UBV-320 drilling rigs with the hydraulic drive of a mobile rotator. UBV drilling rigs are intended for drilling of hydrogeological, exploration, methane drainage and technical wells in grounds to the XII category on drilling capacity.

Сrane drilling machine BKM-370 (371) is intended for trip drilling of wells and also installation of supports in them at construction and repair of telephone and telegraphic lines and power lines.

Crane drilling machine BKM-550 is used at electricity supply network construction for trip drilling of wells, and also installation of high voltage line supports in them; in industrial and civil engineering for drilling of wells for the pile bases, casing pipes of protections and road signs.

Drilling mount MBL 18 is installed on the hydraulic excavator with total mass of 10 tons or the truck with a crane manipulator. It is applied for drilling of wells for anchors, constructions of piles, strengthening’s of bases, drillings of engineering-geological, exploration and seismic prospecting wells, and also water supply wells.

Drilling mount MBL 23 is installed on the hydraulic excavator with total mass of 10 tons. It is applied for drilling of wells for anchors, constructions of piles, strengthening’s of bases, drillings of engineering-geological, exploration and seismic prospecting wells and also water supply wells.

Drilling mount MBL 33 is installed on the hydraulic excavator with total mass of 15 tons. It is applied for drilling of wells for anchors, constructions of piles, strengthening’s of bases, drillings of engineering-geological, exploration and seismic prospecting wells and also water supply wells.

Drilling mount MBL 43 S is installed on the hydraulic excavator with total mass of 10 tons. It is applied for drilling of wells for anchors, constructions of piles, strengthening’s of bases, drillings of engineering-geological, exploration and seismic prospecting wells and also water supply wells.

Drilling mount MBL 65 is installed on the hydraulic excavator. It is applied for drilling of wells for anchors, constructions of piles, strengthening’s of bases, drillings of engineering-geological, exploration and seismic prospecting wells and also water supply wells.

Self-propelled USG-002 Atlant drilling rig with a hydrodriving reversive rotator is intended for drilling at construction of piles in various categories of grounds, including — permafrost.

Hinged drilling equipment of SBL-001. Main essence of the hinged equipment (boring mount) — to work where mobile drilling rigs can't effectively function. Thereby, the excavator becomes more universal tool.

Light drilling mount LBL 1200 is applied for drilling of wells under anchors, constructions of piles, drillings of engineering-geological, exploration and seismic prospecting wells and also shallow wells on water.

Light drilling mount LBL 1200 is applied for drilling of wells under anchors, constructions of piles, drillings of engineering-geological, exploration and seismic prospecting wells and also shallow wells on water. Overall dimensions allow to use LBL 1200 in placements with restriction on height to 2 m.

Light boring rig BAG 15 is applied for drilling of wells for anchors, construction of piles, drilling of engineering geological, exploration and seismic wells, and also wells on water up to 50 m in depth.