In cart 0 products
Order products
Fill out the form below and we will help you choose
Спасибо!
Мы свяжемся с Вами в ближайшее время.
Drilling mount MBL 43 S is installed on the hydraulic excavator with total mass of 10 tons.
It is applied for drilling of wells for anchors, constructions of piles, strengthening’s of bases, drillings of engineering-geological, exploration and seismic prospecting wells and also water supply wells.
Connection with the excavator:
- with adapter
- turn aside by a hydraulic cylinder on +/- 20 deg.
Remote control with the following functions:
- clip of bars "open/close"
- coupling band "lift/lower"
- coupling band "close/open"
- turn of the excavator adapter "runout / in initial"
- rotary mechanism "to the right/to the left"
- feed "lift/lower"
- feed pressure "switch on"
- pressure of the shock mechanism "switch on"
- hammer "switch on/switch off"
Option: the additional hydraulic unit is used at the insufficient hydraulic power of the excavator carrier.
Racks for transport and storage.
Nomenclature |
MBL 43S |
Transport base |
Excavator weighing 10 tons; (hydraulic power: 130 l/min, 210 bars) |
Drilling depth, m: |
|
- augers, diameter to 145 mm |
20 |
- augers, diameter 108 mm |
30 |
- augers with simultaneous upsetting, D=178 mm (casing pipe) |
10 |
- with washing/ air flushing, D=150 mm |
40 |
- anchor piles Titan 30/11 |
30 |
- anchor piles Titan 40/16 |
20 |
- anchor piles Titan 52/26 |
10 |
Boring mount: |
|
- material |
welded design made of section material with the directing sliding tires made of artificial material for a rotator carriage and the place for fastening of a roll chain on a rotator carriage |
- feed mechanism |
planetary reducer |
- feed force down, kN |
40 |
- feed stroke, mm |
3300 |
Rotator/ hydraulic hammer |
at the request of the customer |
Hoisting coupling band: |
|
- drift diameter, mm |
219 |
- feed force up, kN |
76 |
Hydrodrive pipeholder for drill pipes: |
|
- forward pressure, kN |
76 |
- drift diameter in open position, mm |
160 |
- drift diameter in close position, mm |
240 |
Overall dimensions: |
|
- length / width/ height, mm |
5755/ 1414/ 1161 |
Finance lease
JSC «Sberbank Leasing» | +7 (495) 780-73-00 | www.sberleasing.ru |
Ltd «DENMAR LEASING» | +7 (3466) 49-11-16, +7 (3466) 49-11-15 | www.dl-nv.com |
Ltd «STONE-XXI» | +7 (495) 981-19-90 | www.stone-xxi.ru |
JSC «VEB- leasing» | +7 (495) 981-42-40 | www.veb-leasing.ru |
Ltd «Carcade» | +7 (800) 700-30-30 | www.carcade.com |
Ltd «URALSIB leasing company» | +7 (495) 785-12-12 | www.leasing.uralsib.ru |
Ltd «Expert-Leasing» Chelyabinsk | +7 (351) 245-00-00 | www.expert-leasing.ru |
Покупка в лизинг
Drilling mount MBL 43 S is installed on the hydraulic excavator with total mass of 10 tons.
It is applied for drilling of wells for anchors, constructions of piles, strengthening’s of bases, drillings of engineering-geological, exploration and seismic prospecting wells and also water supply wells.
Connection with the excavator:
- with adapter
- turn aside by a hydraulic cylinder on +/- 20 deg.
Remote control with the following functions:
- clip of bars "open/close"
- coupling band "lift/lower"
- coupling band "close/open"
- turn of the excavator adapter "runout / in initial"
- rotary mechanism "to the right/to the left"
- feed "lift/lower"
- feed pressure "switch on"
- pressure of the shock mechanism "switch on"
- hammer "switch on/switch off"
Option: the additional hydraulic unit is used at the insufficient hydraulic power of the excavator carrier.
Racks for transport and storage.
Nomenclature |
MBL 43S |
Transport base |
Excavator weighing 10 tons; (hydraulic power: 130 l/min, 210 bars) |
Drilling depth, m: |
|
- augers, diameter to 145 mm |
20 |
- augers, diameter 108 mm |
30 |
- augers with simultaneous upsetting, D=178 mm (casing pipe) |
10 |
- with washing/ air flushing, D=150 mm |
40 |
- anchor piles Titan 30/11 |
30 |
- anchor piles Titan 40/16 |
20 |
- anchor piles Titan 52/26 |
10 |
Boring mount: |
|
- material |
welded design made of section material with the directing sliding tires made of artificial material for a rotator carriage and the place for fastening of a roll chain on a rotator carriage |
- feed mechanism |
planetary reducer |
- feed force down, kN |
40 |
- feed stroke, mm |
3300 |
Rotator/ hydraulic hammer |
at the request of the customer |
Hoisting coupling band: |
|
- drift diameter, mm |
219 |
- feed force up, kN |
76 |
Hydrodrive pipeholder for drill pipes: |
|
- forward pressure, kN |
76 |
- drift diameter in open position, mm |
160 |
- drift diameter in close position, mm |
240 |
Overall dimensions: |
|
- length / width/ height, mm |
5755/ 1414/ 1161 |
Feedback
Fill out the form below and we will help you choose
Request a callback
The call is active from 9:00 to 18:00 Moscow time.